Veritas Dowelling Jig - 05J0801

Veritas Dowelling Jig
Ref - 474668 / 05J0801

• This jig will not only do centred dowelling, but it will dowel boards of different thicknesses to one reference face; the assembly is perfectly flat on one side and all thickness variations are on the other side. This saves a lot of planing and scraping time. Using a dial, each micrometer clamp head can be set from 6mm(1/4") to 13mm(1/2") from the centre line to handle work from 13mm(1/2") to 25mm(1") thick. The setting is positive and accurate to a few thousandths of an inch. The movable clamp heads will grip work as small as 13mm(1/2") x 35mm(1.3/8"). With boards of constant thickness, you can set the jig for centred dowelling. For boards of uneven thickness, you set the heads for a constant set back from the reference face.
• By using the tapered pin to register off the last hole drilled, you can quickly chain drill dowel holes for tabletops or panels. The movable bush carrier comes with 3 hardened steel bushings: 1/4", 8mm( 5/16"), and 3/8". Other sizes are available. All turnings are solid brass. Machined parts are anodised aluminium.

• For centred dowelling or doweling boards to a reference face
• Micrometer clamp head can be set from 6 to 13mm from the centre line
• Setting is positive and accurate to a few thousands of an inch
• Movable clamp heads will grip work as small as 13mm x 35mm
• Chain drill dowel holes using the tapered pin to register off the last hole drilled
• Movable bushing carrier includes 3 hardened steel bushings: 1/4", 8mm (5/16"), and 3/8".
• All aluminium parts anodized black, except the red bushing carrier
• Register pins and clamping fittings are turned brass