Proxxon TSG 250/E Disc Sander - 230V

Proxxon TSG 250/E Disc Sander - 230V

• Electronic speed control 250 - 750 m/min
• Includes chart for recommended speeds on different materials
• Main body of ribbed die-cast aluminium
• Aluminium extrusion table with a precise T slot
• Table tilts 15° inwards & 45° outwards
• Disc diameter 250mm.
• Dust collection adaptor included
• Supplied with mitre fence and 2 each sanding discs of 100 grit and 240 grit

Strengths and benefits:

• A fine, accurate disc sander with variable electronic speed control from 250 to 750rpm. 
• Sands long edges, end sections, radii, mitres and by turning workpiece over - accurate flat surfaces at right angles. 
• Used on soft and hard woods, non-ferrous metals, steel, plastics (Plexiglass and fibreglass), cork and rubber. 
• Includes chart for recommended speeds on different materials. 
• Main body made from ribbed die-cast aluminium. 
• The table is made from an aluminium extrusion profile with an accurate T slot to precisely guide the mitre fence. 
• It also tilts 15° inwards and 45° outwards (a scale facilitates accurate adjustment). 
• The 250mm machined backing disc is driven by a twin ball bearing spindle. 
• Standard, commercially available sanding discs fix firmly and can be replaced quickly. 
• A dust collection adaptor for attaching a vacuum cleaner/dust extractor is included. 230V with drive via toothed belt (reduction ratio 7.3:1). 
• Maximum sanding height 135mm, table 275 x 105mm. 
• Supplied with a mitre fence and two each of sanding discs 100grit and 240grit. 
• Overall size without table 330 x 280 x 230mm.