Charnwood B225 9” Woodworking Bandsaw 3.5" Cutting Depth - 300w

Charnwood B225 9” Woodworking Bandsaw 3.5" Cutting Depth - 300w

Available from 3rd November 2026!

• 3.5” Cutting Depth Capacity
• 9″ Cutting Width (Throat)
• Supplied with High Quality British Made Blade
• Aluminium Work Table
• Quick Action Lock On Rip Fence
• Crosscutting Mitre Guide Included
• Quiet Induction Motor
• Primarily Used For Woodworking

Versatile Cutting

• A superb entry level bandsaw for the hobby woodworker and DIY enthusiast. It is a complete package with a handy 90mm depth of cut. Straight cuts can be made using the rip fence which has a quick action lever to set the cutting width. For making cross cuts, the mitre guide slides in the table giving a support to control the cut whether at 90 degrees or set anywhere in a 120 degree range. Bevel cuts are also no problem, the table can be tilted to 45 degrees.
• This light weight unit is easy to carry onto the workbench when needed, but compact enough to not take up too much space when being stored.

The Blade

• Unlike any other hobby level bandsaw we supply a premium quality blade, made in the UK. It is after all, the most important part of the saw. Our blades are made from high carbon steel. The teeth are precision ground to give a sharp cutting edge, then go through a hardening process with a result of 62HRC. The blades cut fast and last a long time.

Feature Rich

• Several features on this bandsaw are only usually seen on larger professional models.
• A 6 bearing blade guide system to control the blade and keep it cutting straight
• A quick release lever for setting blade tension simplifies the blade changing process
• Rack & pinion gear to raise and lower the blade guard by simply turning a dial
• Geared adjustment for precisely setting the table angle
• Toothed drive belt to transfer the full power of the motor

Supplied With

• 1/4” x 6tpi premium blade, carrying handle, rip fence, mitre fence, push stick, 1.9m power cable and UK 3 pin plug.
• This Bandsaw is fitted with a High Quality, British manufactured blade with precision ground teeth for incredible cutting results.
• The primary use of this bandsaw is for woodworking and the blade supplied is suitable for cutting both hard and soft woods. The blade supplied can also cut Non-ferrous metals, Plastic and Acrylic. It is possible to use this bandsaw for cutting other materials, but only with a suitable blade fitted.

• Maximum Cutting Depth: 90mm (3.5")
• Throat Width: 228mm (9")
• Max. Cutting Width With Rip Fence: 100mm (4")
• Table Size: 300mm x 300mm
• Table Height From Bench: 333mm
• Table Tilt: 90-45 degrees
• Mitre Guide Adjustment: 60 Degrees Each way
• Mitre Guide Slot Width: 16mm
• Blade Speed: 635m/min
• Motor (induction): 300w (0.4hp), 240v, 50hz
• Blade Length: 1575mm (62")
• Blade Widths: 6mm to 10mm (1/4” to 3/8”)
• Dust Extractor Outlet: 53mm OD / 48mm ID
• Assembled Dimensions (WxDxH): 480mm x 400mm x 760mm
• Shipping Dimensions: 820mm x 440mm x 340mm
• Weight: 20kg
• Assembly Time Required: 20 Minutes
• Rating: Hobby
• Product Guarantee: 5 Years

Charnwood B225 Owners Manual

Charnwood Machinery Five Year Guarantee

If you’re unsure which bandsaw is right for you, visit our Knowledge Centre for a helpful guide to choosing woodworking bandsaws and blades.