CHESTNUT Friction Polish - 500ml

Chestnut Friction Polish 500ml

• Chestnut Products Friction Polish produces a high gloss finish ideal for polishing small items. It has a heavy concentration of shellac which gives a very high build; therefore it is not essential to apply a sealer before application, although a coat of Cellulose Sanding Sealer or Acrylic Sanding Sealer may be applied first if you prefer.

• Typical uses: High gloss finish usually used on the lathe although it can be applied off the lathe
• Method of application: Either by holding a moistened pad against work revolving on the lathe or continued rubbing off the lathe
• Drying time: The friction caused by application means that the polish dries immediately
• Coverage: Virtually impossible to calculate due to the nature of application
• Compatibility: Can be used on bare wood or over any of the Chestnut Products’ Sanding Sealers. The final finish can be treated with Burnishing Cream for an even higher gloss. Waxes can also be applied over Friction Polish.
• Tips: Apply a thin coat and keep the cloth moving. For an incredible finish try applying Friction Polish over a burnished coat of Melamine Lacquer then use Burnishing Cream on top.
• Thinners: Methylated Spirits (Should not be needed)
• Safety Considerations: Highly Flammable. Use Safety Cloth when working on the lathe. (see Safety Data Sheet or warnings on can for full details).

   Chestnut Safety Data Sheet - Friction Polish